715c..kt... www.vishay.com vishay cera-mite revision: 30-jan-13 1 document number: 22210 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage class 1 ceramic dc disc capacitors, screw terminal mounting ,10 kv dc to 40 kv dc dielectric strength 150 % of rated voltage, charging current limited to 50 ma dissipation factor tan ? ? 2 x 10 -3 (1 khz) insulation resistance min. 200 000 m ? or 1000 ? f min. at 25 c corona limit < 5 pc at rated ac voltage operating temperature range - 30 c to + 85 c features ? low dissipation factor of 0.2 % at 1 khz ? n4700 (t3m) class 1, strontium-based ceramic dielectric ? negligible piezoelectric/electrostrictive effect ? low inductance ? high insulation resistance ? epoxy coating ? screw terminal mounting ? ceramic singlelayer capacitor applications ? high voltage power supplies ? co 2 lasers ? x-ray equipment ? welding equipment ? industrial capacitance range 140 pf to 8 nf rated voltage (1) ?10 kv dc (3.5 kv rms ) ?15 kv dc (5.3 kv rms ) ?20 kv dc (7.0 kv rms ) ?30 kv dc (10.6 kv rms ) ?40 kv dc (14 kv rms ) note (1) all kv rms values up to 60 hz ceramic dielectric n4700 (class 1) material capacitor elements made from class 1 ceramic in a molded epoxy case. screw terminals: brass, silver plated marking type designator, capacitanc e value, rated dc voltage, ceramic material code, production date code, cera-mite logo power dissipation limit to 25 c rise above ambient, measured on case capacitance tolerances 20 % quick reference data description value ceramic class 1 ceramic dielectric n4700 type 715c10 kt### 715c15 kt### 715c20 kt### 715c30 kt### 715c40 kt### voltage (v dc ) 10 000 15 000 20 000 30 000 40 000 min. capacitance (pf) 560 370 280 190 140 max. capacitance (pf) 8000 5300 4000 2700 2000 mounting screw terminal
715c..kt... www.vishay.com vishay cera-mite revision: 30-jan-13 2 document number: 22210 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters (inches) notes (1) screw torque limit must be 12 inch pounds. us e #8-32, 3/16" long scre w to prevent bottoming (2) to order m5 terminals add m5 su ffix to model number, use screw le ngth of 5 mm to prevent bottoming ordering information 715c15ktd33 15 kv dc 3300 pf 20 % n4700 model rated voltage capacitance value tolerance ceramic sap part number, electrical, and dimensional data model ceramic capacitance values (pf) rated voltage (kv dc ) rated voltage (kv rms ) d 1 mm (0.04") h with #8-32 terminals 1 mm (0.04") h with m5 metric terminals 1 mm (0.04") 715c10kt### 715c10ktt56 n4700 560 10 3.5 21 (0.83) 18 (0.70) n/a 715c10ktd10 1000 25 (1.00) 715c10ktd12 1200 25 (1.00) 715c10ktd22 2200 38 (1.50) 19 (0.76) 715c10ktd28 2800 38 (1.50) 715c10ktd50 5000 48 (1.89) 715c10ktd80 8000 60 (2.36) 715c15kt### 715c15ktt37 n4700 370 15 5.3 21 (0.83) 20 (0.79) n/a 715c15ktd10 1000 32 (1.25) n/a 715c15ktd19 1900 38 (1.50) 22 (0.85) 715c15ktd33 3300 48 (1.89) 715c15ktd53 5300 60 (2.36) 715c20kt### 715c20ktt28 n4700 280 20 7 21 (0.83) 23 (0.89) n/a 715c20ktt56 560 25 (1.00) n/a 715C20KTD10 1000 32 (1.25) 24 (0.95) 715c20ktd14 1400 38 (1.50) 715c20ktd25 2500 48 (1.89) 715c20ktd40 4000 60 (2.36) 715c30kt### 715c30ktt19 n4700 190 30 10.6 21 (0.83) 28 (1.09) n/a 715c30ktt40 400 32 (1.25) n/a 715c30ktt59 590 32 (1.25) 29 (1.15) 715c30ktt94 940 38 (1.50) 715c30ktd17 1700 48 (1.89) 715c30ktd27 2700 60 (2.36) 715c40kt### 715c40ktt14 n4700 140 40 14 21 (0.83) 31 (1.22) n/a 715c40ktt44 440 32 (1.25) 32 (1.28) 715c40ktt70 700 38 (1.50) 715c40ktd10 1000 44 (1.75) 715c40ktd13 1300 48 (1.89) 715c40ktd20 2000 60 (2.36) d 1 (0.04) 8-32nc-2b tapped hole s s tandard terminal (1) or m5 tapped hole s (2) h 1 (0.04)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
